![Attuatore](https://www.4gghidini.it/wp-content/uploads/2018/08/790050_INOX.jpg)
790060_SIMPLE EFFECT PNEUMATIC ACTUATOR_INOX
SIMPLE EFFECT PNEUMATIC ACTUATOR IN STAINLESS STEEL – 90 °
•Forged Stainless Steel type A182 – F316 – EN 10088/3 – 1.4401 Body, inside surface finish (Ra 0,4 – 0,6 um) to minimize friction and maximize the actuator’s life.
•ENAB 46100 T6 die-casted Aluminium alloy Pistons, Anodizing.
•Micro-casted Stainless Steel type A182 – F316 – EN 10088/3 – 1.4401 Covers.
•Forged Stainless Steel type AISI 316 (A4) Shaft.
•Screws in Stainless Steel AISI 316 (A4).
•Seals in nitrile nubber NBR.
•Acetalic resin + 20% PTFE Bearings, made by low friction coefficient material to avoid “metal to metal” contact, easely replaceable for maintenance.
•Pre-compressed cartridge springs painted with polyester powder.
•High performances Syntetic Grease.
•Double lower drilling for valve fastening and centering according to ISO 5211-DIN 3337 standards.
•Lower female shaft key according to ISO 5211-DIN 3337 standards to assembly on valves with square key on line and 45° shaft.
•Solenoid connections according to NAMUR VDIVDE-3845 standards.
•Top drilling for accessories fastening, and upper shaft end according to NAMUR VDIVDE-3845 standards.
•3D position indicator.
•Adhesive nameplates with progressive serial number punched.
•The lubrification carried out by the manufacturer is guaranted for min. 1.000.000 operations.
•Running test and 100% seal test carried out with electronic equipment and certification of each individual product.
•According to ATEX 2014/34/UE Standard for explosive environnement; STANDARD version actuator: I M2 – II 2GD c Tmax = 95°C.
•According to EN 15714-3 design and manufacture standard requirements.
•EN 60529\A1 – Protection degree of casings IP 67.
USE:
AIR SUPPLY: dry or lubricated filtered compressed air.
TEMPERATURE RANGE: -20°+80°C
FEEDING PRESSURE: 1 bar minimum – 8 bar/120 psi maximum.
STANDARD ROTATION: counterclockwise.
TYPE | MOLLE PER OGNI LATO DEL PISTONE | 3 BAR 0° - 90° | 4 BAR 0° - 90° | 5 BAR 0° - 90° | 6 BAR 0° - 90° | 7 BAR 0° - 90° | 8 BAR 0° - 90° | TORSIONE MOLLA | CODE |
---|---|---|---|---|---|---|---|---|---|
AP 042-I 4 Molle 4 Spring | 3 4 | - - - - | - - - - | 7,1 - 4,1 - - | 9,3 - 6,3 8,1 - 4,1 | 11,5 - 8,5 10,2 - 6,2 | 13,7 - 10,7 12,4 - 8,4 | 6,8 - 3,8 9,0 - 5,0 | 790060 6074A 3D |
AP 050-I 6 Molle 6 Spring | 3 4 5 6 | 5,7 - 3,5 | 8,9 - 6,6 7,7 - 4,7 | 12,0 - 9,6 10,8 - 7,7 9,6 - 5,8 8,4 - 3,9 | 15,1 - 12,7 13,9 - 10,8 12,7 - 8,9 11,5 - 7,0 | 18,1 - 15,7 16,9 - 13,8 15,7 - 11,9 14,5 - 10,0 | 21,2 - 18,8 20,0 - 16,9 18,8 - 15,0 17,6 - 13,1 | 5,7 - 3,5 7,7 - 4,7 9,6 - 5,8 11,5 - 7,0 | 790060 6106A 3D |
AP 063-I 6 Molle 6 Spring | 3 4 5 6 | 9,4 - 6,3 | 14,9 - 11,7 12,3 - 8,3 | 20,4 - 17,2 17,8 - 13,8 15,4 - 10,4 13,0 - 7,0 | 25,9 - 22,7 23,3 - 19,3 20,9 - 15,9 18,5 - 12,5 | 31,4 - 28,2 28,8 - 24,8 26,4 - 21,4 24,0 - 18,0 | 36,9 - 33,7 34,3 - 30,3 31,9 - 26,9 29,5 - 23,5 | 10,2 - 7,2 13,7 - 9,7 17,1 - 12,1 20,5 - 14,5 | 790060 6166A 3D |
AP 075-I 6 Molle 6 Spring | 3 4 5 6 | 22,5 - 12,6 | 34,2 - 24,4 30,0 - 16,9 | 46,0 - 36,1 41,8 - 28,6 37,6 - 21,1 33,4 - 13,6 | 57,7 - 47,8 53,5 - 40,3 49,3 - 32,8 45,1 - 25,3 | 69,4 - 59,5 65,2 - 52,0 61,0 - 44,5 56,8 - 37,0 | 81,1 - 71,2 76,9 - 63,7 72,7 - 56,2 68,5 - 48,7 | 22,5 - 12,6 30,0 - 16,9 37,6 - 21,1 45,1 - 25,3 | 790060 6206A 3D |
AP 085-I 6 Molle 6 Spring | 3 4 5 6 | 34,5 - 18,9 | 52,4 - 36,7 46,1 - 25,2 | 70,2 - 54,5 63,9 - 43,0 57,6 - 31,5 51,5 - 20,0 | 88,0 - 72,3 81,7 - 60,8 75,4 - 49,3 69,1 - 37,8 | 106 - 90,1 99,5 - 78,6 93,2 - 67,1 86,9 - 55,6 | 124 - 108 117 - 96,4 111 - 84,9 105 - 73,4 | 34,5 - 18,9 46,1 - 25,2 57,6 - 31,5 69,1 - 37,8 | 790060 6256A 3D |
AP 100-I 6 Molle 6 Spring | 3 4 5 6 | 53,2 - 30,0 | 80,9 - 57,7 70,9 - 40,0 | 109 - 85,4 98,7 - 67,7 88,7 - 50,0 78,7 - 32,2 | 136 - 113 126 - 95,4 116 - 77,7 106 - 60,0 | 164 - 141 154 - 123 144 - 105 134 - 87,7 | 192 - 169 182 - 151 172 - 133 162 - 115 | 53,2 - 30,0 70,9 - 40,0 88,7 - 50,0 106 - 60,0 | 790060 6306A 3D |
AP 115-I 6 Molle 6 Spring | 3 4 5 6 | 84,3 - 53,0 | 130 - 98,8 112 - 70,7 | 176 - 145 158 - 116 140 - 88,3 123 - 60,2 | 222 - 190 204 - 162 186 - 134 169 - 106 | 267 - 236 250 - 208 232 - 180 214 - 152 | 313 - 282 295 - 254 278 - 226 260 - 197 | 84,3 - 53,0 112 - 70,7 140 - 88,3 169 - 106 | 790060 6356A 3D |
AP 125-I 6 Molle 6 Spring | 3 4 5 6 | 117 - 63,7 | 177 - 124 156 - 85,0 | 237 - 184 216 - 145 195 - 106 173 - 67,4 | 298 - 244 276 - 205 255 - 166 234 - 128 | 358 - 304 336 - 265 315 - 227 294 - 188 | 418 - 364 396 - 326 375 - 287 354 - 248 | 117 - 63,7 156 - 85,0 195 - 106 234 - 128 | 790060 6406A 3D |
AP 145-I 6 Molle 6 Spring | 3 4 5 6 | 158 - 92 | 245 - 179 211 - 123 | 332 - 265 298 - 210 264 - 154 230 - 98 | 418 - 352 384 - 269 350 - 240 316 - 184 | 505 - 439 471 - 383 437 - 327 403 - 271 | 592 - 526 558 - 470 524 - 414 490 - 358 | 168 - 102 224 - 136 280 - 170 336 - 204 | 790060 6456A |
ACTUATOR TORQUE IN Nm
![](https://www.4gghidini.it/wp-content/uploads/2020/01/790060_INOX_1.jpg)
POSITION | AP 032 | AP 042 | AP 050 | AP 063 | AP 075 | AP 085 | AP 100 | AP 115 | AP 125 | AP 145 |
---|---|---|---|---|---|---|---|---|---|---|
A-90° | 104 | 140 | 139 | 152 | 205 | 230 | 275 | 307 | 359 | 388 |
B | 45 | 57 | 68 | 83 | 100 | 110 | 125 | 142 | 155 | 175 |
C | 49,5 | 71 | 79 | 98 | 113 | 123 | 140 | 161 | 173 | 200 |
F x G | 50 x 25 | 80 x 30 | 80 x 30 | 80 x 30 | 80 x 30 | 80 x 30 | 80 x 30 | 130 x 30 | 130 x 30 | 130 x 30 |
L | 23,5 | 30,5 | 34,5 | 41,5 | 49 | 54 | 62,5 | 73 | 79 | 95 |
M | 26 | 40,5 | 44,5 | 56,5 | 64 | 69 | 77,5 | 88 | 94 | 105 |
Port.A-Port.B DIN259 | 1/8" GAS | 1/8" GAS | 1/8" GAS | 1/4" GAS | 1/4" GAS | 1/4" GAS | 1/4" GAS | 1/4" GAS | 1/4" GAS | 1/4" GAS |
N x O | 8 x 12 | 8 x 12 | 8 x 12 | 8 x 12 | 14 x 18 | 14 x 18 | 14 x 18 | 27 x 36 | 27 x 36 | 27 x 36 |
P | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 30 | 30 | 30 |
Q x I | 9 x 10 | 11 x 13 | 11 x 13 | 14 x 16 | 17 x 20 | 17 x 20 | 22 x 25 | 22 x 25 | 27 x 30 | 27 x 30 |
F.ISO 5211 | F03 / 05 | F03 / 05 | F03 / 05 | F03 / 05 / 07 | F05 / 07 | F05 / 07 | F05 / 07 / 10 | F07 / 10 | F07 / 10 / 12 | F10 / 12 |
![](https://www.4gghidini.it/wp-content/uploads/2020/01/790060inox_2.jpg)
POS. | DENOMINATION | PCS | MAT. |
---|---|---|---|
1 | Body | 1 | AISI 316 (A4) |
2 | Pistons | 2 | ENAB 46100 T6 |
3 | Cover | 2 | AISI 316 (A4) |
4 | Pinion | 1 | AISI 316 (A4) |
5 * | Anti-ejection key | 2 | Resina Acetalica - Acetalic resin |
6 * | Pinion inferior O-Ring | 1 | NBR |
7 * | Pinion superior O-Ring | 1 | NBR |
10 * | Seeger | 1 | Acciaio per molle - Spring steel |
11 | Spring group | 12 | Acciaio per molle -Spring steel |
12 * | Piston O-Ring | 2 | NBR |
13 * | Piston anti-friction ring | 2 | Resina Acetalica - Acetalic resin |
14 * | Cover Seal | 2 | NBR |
15 | Identification plate | 1 | Alluminio - Aluminium |
16 | Cover fixing screw | 8 | AISI 316 (A4) |
17 | Nut | 2 | AISI 316 (A4) |
18 | Washer | 2 | AISI 316 (A4) |
19 * | O-ring | 2 | NBR |
21 | Cover screw | 2 | AISI 316 (A4) |
23 * | Pinion thrust washer | 1 | AISI 316 (A4) |
24 * | Anti-friction washer | 1 | Resina Acetalica - Acetalic resin |
25 * | Inferior pinion guide ring | 1 | Resina Acetalica - Acetalic resin |
26 * | Superior pinion guide ring | 1 | Resina Acetalica - Acetalic resin |
27 * | Piston bearing | 2 | Resina Acetalica - Acetalic resin |
28 | Piston Adjusting Screw | 2 | AISI 316 (A4) |
32 | NAMUR plate | 1 | AISI 316 (A4) |
33 | O-Ring for NAMUR plate | 2 | Resina Acetalica - Acetalic resin |
34 | NAMUR plate screw | 2 | AISI 316 (A4) |
* | Spares kit |